SV910 – Advanced Vehicle Networking Platform (5G Gateway for Fleet & Transportation)

SIM Card Interface

2 × nano-SIM slots

ESIM（Optional）

2 × eSIM cards

Wi-Fi（Optional）

IEEE 802.11b/g/n/ac/ax
IEEE 802.11ax(WiFi6)，Up to 1774Mbps
IEEE 802.11ac(WiFi5)，Up to 866Mbps

GPS/ Beidou（Optional）

Supports GPS/Beidou

Antenna Interface

Two 4-in-1 mini FAKRA 5G/4G antenna ports,
One 4-in-1 mini FAKRA Wi-Fi antenna port,
One mini FAKRA V2X antenna port,
One 4G antenna port.

Power Interface

1 × 4-pin aviation connector, supporting dual redundant power inputs: DC 9–48 V

Serial Port

1*RS232,1*RS485

CAN Interface

2 × CAN interfaces, expandable to 3 × CAN interfaces

Relay

2 × relay outputs, maximum input voltage: 30 VDC / 250 VAC, maximum current: 5 A

DI

2 × opto-isolated DI channels (DI0 for dry contact testing, DI1 for wet contact testing)
Logic 0: Wet contact 0–2 VDC or dry contact closed
Logic 1: Wet contact 9–30 VDC or dry contact open

Indicators

9 Indicators (1 PWR、1 SYS、1 WIFI、1 NET、3 signal strength、SIM1、 SIM2)

Power Characteristics

Power Supply 

External power adapter (12V 2A)

Operating Voltage

Wide power input DC 9~48V

Operating Conditions

Operating Temperature

 -35~+75℃ (-31~+167℉)

Storage Temperature

-40~+85℃ (-40~+185℉)

Operating Humidity

5%~95% (non-condensing)

Device Ventilation   

Natural heat dissipation, no noise

Physical Characteristics

Casing Material

Aluminum alloy housing

Dimensions

Length*width*height 233.8*142.7*58mm（excluding antenna and installation accessories）

Installation Method

Desktop placement

Weight

Net weight：1.7KG(excluding antenna and installation accessories)

Device Safety and Reliability

Hardware WatchDog

Built-in hardware watchdog with automatic device fault self-recovery

Safety and Reliability

Reverse polarity protection, overvoltage protection, overcurrent protection; Ethernet interface built-in 1.5KV electromagnetic isolation protection; RS232/RS485 interface built-in 15KV ESD protection; SIM/UIM card interface built-in 15KV ESD protection

IP40

Certification

Complies with CCC、Rohs、CE

Networking Feature

Cellular Network

Supports dual-module configuration, with options for dual 5G or 5G + 4G/RedCap modules.

5G LAN(optional)

Supports 5G LAN

Bridge Mode

Supports bridge mode, which can directly assign the IP from cellular network dial-up to the subordinate device

WAN Protocol

Supports Static IP、DHCP、PPPOE

IP Applications

Supports Ping、Trace、DHCP Server、DHCP Relay、DHCP Client、DNS relay、DDNS、Telnet

GPTP

Supports TSN (Time-Sensitive Networking) and the IEEE 802.1AS protocol, with nanosecond-level synchronization accuracy

PTP

Supports IEEE 1588v2 PTP (Precision Time Protocol) based on hardware, with nanosecond-level synchronization accuracy

Wi-Fi

Supports both AP (Access Point) mode and Client (STA) mode

VLAN

Supports VLAN, including both Tagged and Untagged modes for VLAN ID assignment

Multi-link Management

Supports link detection, link backup, and flexible backup combinations of dual 5G, WAN, and Wi-Fi

Static Routing

Supports adding static routes

Dynamic Routing

Supports dynamic routing protocols OSPF and RIP

Policy Routing

Supports policy routing to enable traffic splitting

Wi-Fi（Optional）

Protocol Standards

IEEE 802.11b/g/n/ac/ax (Optional)

Speed

IEEE 802.11ax(WiFi6)，Up to 1774Mbps
IEEE 802.11ac(WiFi5)，Up to 866Mbps

Security Features

Open system, shared key, WPA/WPA2 authentication, WEP/TKIP/AES encryption

Working Modes

AP and Client（WiFi STA）

Firewall&Network Security

Firewal

Full-state packet inspection (SPI), DoS attack prevention, multicast Ping packet filtering, port mapping, and IP-MAC binding

VPN

IPsec/OPENVPN/L2TP/PPTP/VXLAN/GRE /GRETAP

NAT

Supports DMZ and Port Forwarding

Address Filtering

Supports IP, domain name, and MAC filtering; Allows configuration of blacklists and whitelists

Applications

DTU

Supports TCP, UDP, MQTT, HTTP, HJ212-2017, NTRIP, MODBUS TCP, MODBUS RTU, and MODBUS TCP-to-MODBUS RTU protocols

Data Acquisition

Southbound: Supports Modbus RTU/TCP and Siemens S7 protocols Northbound: Supports TCP, MQTT, HTTP, JSON, HJ212-2017; Supports up to 5 configurable servers with different protocols

Status Reporting&Retrieval

Supports querying and scheduled reporting of device status via TCP, MQTT, or HTTP, including dial-up status, operational status, and link usage

Traffic Statistics

Supports total device traffic and per-IP traffic statistics; Supports bandwidth control for excessive traffic

Scheduled Tasks

Supports scheduled reboot and customizable scheduled tasks

Cloud Device Management Platform

Supports remote configuration, remote upgrade, and remote monitoring

Location Services

Supports cell tower-based positioning; Optionally supports GPS/BeiDou; Can report either Base Station or GPS information

SNMP

Supports SNMP v1/v2/v3

System Settings

Logging Functionality

Supports local system log viewing, remote logging, and serial output logs; Supports log retention during power outage

Configuration Mode

Supports configuration via Web, Telnet, SSH, and Console; Supports configuration import and export

Upgrade Mode

Supports WEB upgrade and FOTA upgrade

System Time Settings

Built-in RTC clock; Supports NTP network time synchronization, manual time setting, and GPS time synchronization

Maintenance tools

Ping, Route tracing

Status Query

System status, modem status, network connection status, route status

Low Power Consumption Features

Remote Wake-up

Supports entering or exiting low power mode via commands sent from a TCP server

Local Wake-up

Supports entering or exiting low power mode via commands sent from RS485 or CAN