How Do Industrial Firewalls and Edge Gateways Work Together?
Industrial networks often connect field equipment, local computing platforms, and higher-level systems through multiple network layers. As industrial control and edge computing architectures become more connected, network connectivity and security need to be considered together. An Industrial Firewall and an Edge Gateway address different parts of this architecture. The gateway is positioned closer to the network edge, while the firewall focuses on network boundaries and traffic processing.
These functions do not always need to be provided by separate devices. Some industrial platforms combine gateway, firewall, and networking functions in one hardware platform. Understanding the relationship between the two can help when planning an industrial network and deciding between an integrated or separate hardware configuration.
Why Combine an Industrial Firewall and Edge Gateway?
An Edge Gateway provides a connection point between industrial equipment and other network or computing layers. An Industrial Firewall is used where communication between network segments requires security-oriented traffic processing.
Their roles can be considered as follows:
- Edge Gateway: edge-side connectivity and networking
- Industrial Firewall: network boundary and traffic processing
- Combined deployment: connectivity and network security within the same system architecture
This does not mean every installation requires two separate devices. Where a gateway platform already incorporates firewall and networking functions, one device may cover several roles. Where different hardware positions, interfaces, or processing requirements are involved, an Industrial Firewall and Edge Gateway can instead be evaluated as complementary components.
The hardware arrangement should follow the network structure rather than a fixed product combination.
How Can They Fit Into an Industrial Network?
A simplified architecture can be illustrated as:
Industrial Devices → Edge Gateway → Industrial Firewall → Upper-Level Network
This is one possible arrangement rather than a fixed deployment model. The actual position of each function depends on the network topology, traffic requirements, and whether gateway and firewall functions are integrated.
In this type of setup, the Edge Gateway is closer to field-level equipment. It provides an edge-side connection between industrial devices and other network layers. The Industrial Firewall can be positioned at a network boundary where communication between different segments needs to be controlled or processed.
Another option is to combine these functions within one industrial platform. This can be useful where physical space, interface requirements, or edge deployment conditions favor an integrated design.
Before selecting hardware, identify three areas of the network:
- Where industrial equipment connects
- Where edge-side networking or computing takes place
- Where communication crosses into another network segment
These points provide a practical basis for deciding how gateway and firewall functions should be arranged.
What Does an Edge Gateway Provide?
An Edge Gateway operates near industrial equipment and local network infrastructure. Its role is to provide an edge-side platform for industrial connectivity, networking, and, where supported by the hardware, local computing.
The product range includes an industrial edge platform with a DIN-Rail form factor and a Firewall / Networking Appliance positioning. The AD03 is also described as an Industrial Gateway/Firewall, showing that gateway and firewall functions can be combined in an industrial hardware platform.
The platform can be evaluated according to requirements such as:
- Industrial network connectivity
- Ethernet interface configuration
- Local computing requirements
- Physical installation
- Edge deployment conditions
- Networking and firewall functions
The AD03 industrial edge platform uses an Intel N Series or Intel Atom x7000 Series processor platform and provides multiple Ethernet interfaces, including RJ45 and SFP connectivity. Its DIN-Rail form factor and fanless design are also suited to industrial deployment considerations.
This product positioning matters when an Edge Gateway and Industrial Firewall are being considered together. The first question is whether the selected edge platform already provides the networking and firewall functions required by the system.
What Does an Industrial Firewall Provide?
An Industrial Firewall is used where network security and traffic processing form part of the system design.
For industrial networking platforms, hardware architecture can be as important as the firewall function itself. Interface configuration, packet-processing requirements, and networking technologies can influence platform selection.
The industrial networking product range includes technologies such as DPDK, TSN, and 1588. These technologies address different requirements. DPDK is associated with packet processing, while TSN and 1588 relate to time-sensitive networking and network synchronization.
They are not required for every Industrial Firewall application. Their relevance depends on the communication architecture and the technical requirements of the network.
For example, a system with higher packet-processing demands may require a platform designed for efficient packet handling. A time-sensitive industrial network may also need to consider TSN or 1588. These requirements should be established from the application before hardware is selected.
How Do the Two Products Work Together?
The relationship between an Industrial Firewall and an Edge Gateway becomes clearer when their roles are considered along the same communication path.
The Edge Gateway provides the edge-side connection, while the Industrial Firewall can provide a network boundary where required. The two functions therefore complement each other without necessarily performing the same task.
A simplified communication path is:
Industrial Equipment
↓
Edge Connectivity
↓
Network Boundary
↓
Upper-Level Network
The Edge Gateway can provide the hardware platform for the edge side of this path. The Industrial Firewall can address communication between the industrial environment and another network segment.
Where the functions are integrated, one industrial platform may provide gateway, firewall, and networking capabilities. Where they are separated, each device can be positioned according to the network topology.
This distinction changes how the products should be evaluated. Instead of asking whether an Industrial Firewall or Edge Gateway is the better choice, it is more useful to identify which network functions are required at each point in the system.
How Should an Industrial Firewall and Edge Gateway Be Matched?
The two products should be evaluated against the same network requirements.
Network Interfaces
Ethernet interfaces determine how industrial equipment, network segments, and upstream systems can be connected. The gateway and firewall should therefore be reviewed against the planned topology.
Before selecting the hardware, consider:
- The number of connected network segments
- Required Ethernet speeds
- RJ45 or SFP interface requirements
- Whether separate ports are needed for network segmentation
The interface configuration should match the actual communication path.
Processing Requirements
Network traffic and local computing requirements can affect the hardware selection.
For the firewall side, packet-processing technologies such as DPDK may become relevant when traffic places greater demands on the networking platform.
For the gateway side, processing requirements depend on the computing and networking functions that need to operate at the edge.
These requirements should be assessed together rather than selecting the processor independently from the network architecture.
Network Timing
Some industrial networks have timing and synchronization requirements. In these systems, TSN and 1588 can become relevant when evaluating the networking platform.
They should not be treated as mandatory technologies for every deployment. Their value depends on whether the application requires time-sensitive communication or network synchronization.
Physical Deployment
The installation environment can also influence whether an integrated or separate design is suitable.
A DIN-Rail industrial platform can be considered when hardware needs to fit into an industrial control cabinet or similar installation. The AD03 is presented with a DIN-Rail form factor, fanless design, and industrial operating range.
These physical characteristics should be considered alongside interfaces and processing requirements rather than evaluated separately.
When Is This Combination Useful?
An Industrial Firewall and Edge Gateway combination can be considered where edge connectivity and network security are both part of the industrial network design.
Industrial Control
Industrial control systems may contain several network layers connecting equipment with higher-level systems. An Edge Gateway can provide edge-side connectivity, while firewall functions can be used at a network boundary where required.
Industrial IoT
Industrial IoT environments can connect equipment and computing resources across different network layers. An Edge Gateway can provide the local hardware platform, while an Industrial Firewall can address communication between network segments.
Edge Computing
Edge computing places computing resources closer to industrial data sources. An Edge Gateway can provide the local infrastructure, while firewall functions can be integrated into the same platform or positioned separately according to the network design.
Power Grid Automation
Power grid automation can involve specific networking and timing requirements. Where the system requires time-sensitive communication or synchronization, technologies such as TSN and 1588 can be considered as part of the networking platform evaluation.
Should the Gateway and Firewall Be Separate Devices?
Not necessarily.
The choice between separate and integrated hardware depends on network topology, interface requirements, processing capabilities, physical installation, and the required security architecture.
An integrated platform can combine gateway and firewall functions when the hardware provides the necessary capabilities. The AD03, for example, is positioned as an Industrial Gateway/Firewall and a DIN-Rail Firewall / Networking Appliance.
Separate devices may be considered when the network requires different hardware locations, interface configurations, or processing capabilities.
This makes the relationship between the two product categories more flexible than a fixed “gateway plus firewall” configuration. The final arrangement should reflect the structure and requirements of the industrial network.
How Should the Architecture Be Evaluated?
A practical evaluation can start with the communication path rather than individual product specifications.
First, identify the industrial equipment and required network interfaces. Then determine which networking or computing functions need to operate at the edge. Finally, identify where communication crosses between network segments and whether an Industrial Firewall function is required at that boundary.
The evaluation can focus on five areas:
Connectivity: Can the edge platform provide the required network interfaces?
Edge Computing: Does the platform provide the processing resources required at the network edge?
Network Security: Where does the Industrial Firewall function need to operate?
Deployment: Does the hardware fit the physical installation and operating conditions?
Networking Technology: Are DPDK, TSN, 1588, or other technologies relevant to the application?
This approach keeps the Industrial Firewall and Edge Gateway within the same system-level discussion without assuming that every industrial network requires the same hardware arrangement.
An Industrial Firewall and an Edge Gateway can serve complementary roles within an industrial network. The gateway addresses connectivity at the network edge, while the firewall addresses network boundaries and traffic processing. In some industrial platforms, these functions can also be integrated into one device.
Selection should consider network topology, interfaces, processing requirements, timing, security needs, and installation conditions.
FAQ
What is the difference between an Industrial Firewall and Edge Gateway?
An Edge Gateway focuses on edge-side connectivity, while an Industrial Firewall focuses on network boundaries and traffic processing.
Can an Edge Gateway include firewall functions?
Some industrial edge platforms combine gateway, firewall, and networking functions within one hardware platform.
When should separate devices be considered?
Separate devices may be useful when interface, processing, topology, or deployment requirements call for different hardware positions.
When do DPDK, TSN, and 1588 matter?
They may matter when packet processing, time-sensitive networking, or synchronization affects the network design.
What should be checked before selecting both products?
Review network interfaces, traffic requirements, edge computing needs, timing requirements, physical deployment, and network topology.



