China Suppliers SV910 – Advanced 5G Vehicle Gateway for Fleet & Transportation from Factory
Product Features
Supports dual-mode configurations with optional dual 5G or 5G+4G/Redcap modules
Supports 3×1000/100 BASE-T1, 3×100 BASE-T1, and 2×1000/100 BASE-TX ports
Supports SIM/eSIM cards
Supports two DO channels (relay outputs) and two DI channels (one dry-contact input and one wet-contact input)
Supports input-voltage monitoring with reporting and alarm functions
Supports low power mode, with remote and local wake-up (Optional)
Supports V2X (Optional)
Supports Time-Sensitive Networking (TSN) technology and IEEE 802.1AS (gPTP) protocol, with nanosecond-level synchronization accuracy
Supports IEEE 1588v2 PTP (Precision Time Protocol) based on hardware, with nanosecond-level synchronization accuracy
Technical Parameters
| Hardware Performance | |
| CPU | Quad-core A55, up to 2 GHz clock speed |
| Memory | 2GB, expandable to 8GB |
| FLASH | EMMC 8GB, expandable to 64GB |
| WIFI (Optional) | Supports 2.4G/5.8G dual-band with a theoretical maximum speed of 866.7Mbps. Optional WIFI6 with a theoretical maximum speed of 1774Mbps |
| Network support |
5G: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N71/N75/N76/N77/N78/N79 4G: FDD-LTE: B1/B3/B5/B7/B8/B20/B28/B32/B71 TDD-LTE: B38/B40/B41/B42/B43 3G: WCDMA: B1/B2/B4/B5/B8 Note: Frequency bands not listed can be supported by replacing the module |
| System Time | Time synchronization using NTP technology with built-in RTC |
| Interfaces | |
| Automotive Ethernet Interfaces | 3 × 1000/100 BASE-T1 and 3 × 100BASE-T1 |
| Standard Ethernet Interfaces | 2 × 1000/100 BASE-TX Ethernet interfaces with M12 aviation connectors |
| SIM Card Interface | 2 × nano-SIM slots |
| ESIM (Optional) | 2 × eSIM cards |
| Wi-Fi (Optional) | IEEE 802.11b/g/n/ac/ax IEEE 802.11ax(WiFi6), Up to 1774Mbps IEEE 802.11ac(WiFi5), Up to 866Mbps |
| GPS/ Beidou (Optional) | Supports GPS/Beidou |
| Antenna Interface | Two 4-in-1 mini FAKRA 5G/4G antenna ports, One 4-in-1 mini FAKRA Wi-Fi antenna port, One mini FAKRA V2X antenna port, One 4G antenna port. |
| Power Interface | 1 × 4-pin aviation connector, supporting dual redundant power inputs: DC 9–48 V |
| Serial Port | 1*RS232, 1*RS485 |
| CAN Interface | 2 × CAN interfaces, expandable to 3 × CAN interfaces |
| Relay | 2 × relay outputs, maximum input voltage: 30 VDC / 250 VAC, maximum current: 5 A |
| DI | 2 × opto-isolated DI channels (DI0 for dry contact testing, DI1 for wet contact testing) Logic 0: Wet contact 0–2 VDC or dry contact closed Logic 1: Wet contact 9–30 VDC or dry contact open |
| Indicators | 9 Indicators (1 PWR, 1 SYS, 1 WIFI, 1 NET, 3 signal strength, SIM1, SIM2) |
| Power Characteristics | |
| Power Supply | External power adapter (12V 2A) |
| Operating Voltage | Wide power input DC 9~48V |
| Operating Conditions | |
| Operating Temperature | -35~+75℃ (-31~+167℉) |
| Storage Temperature | -40~+85℃ (-40~+185℉) |
| Operating Humidity | 5%~95% (non-condensing) |
| Device Ventilation | Natural heat dissipation, no noise |
| Physical Characteristics | |
| Casing Material | Aluminum alloy housing |
| Dimensions | Length*width*height 233.8*142.7*58mm (excluding antenna and installation accessories) |
| Installation Method | Desktop placement |
| Weight | Net weight: 1.7KG (excluding antenna and installation accessories) |
| Device Safety and Reliability | |
| Hardware WatchDog | Built-in hardware watchdog with automatic device fault self-recovery |
| Safety and Reliability | Reverse polarity protection, overvoltage protection, overcurrent protection; Ethernet interface built-in 1.5KV electromagnetic isolation protection; RS232/RS485 interface built-in 15KV ESD protection; SIM/UIM card interface built-in 15KV ESD protection |
| Protection Level | IP40 |
| Certification | Complies with CCC, Rohs, CE |
| Networking Feature | |
| Cellular Network | Supports dual-module configuration, with options for dual 5G or 5G + 4G/RedCap modules. |
| 5G LAN (optional) | Supports 5G LAN |
| Bridge Mode | Supports bridge mode, which can directly assign the IP from cellular network dial-up to the subordinate device |
| WAN Protocol | Supports Static IP, DHCP, PPPOE |
| IP Applications | Supports Ping, Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet |
| GPTP | Supports TSN (Time-Sensitive Networking) and the IEEE 802.1AS protocol, with nanosecond-level synchronization accuracy |
| PTP | Supports IEEE 1588v2 PTP (Precision Time Protocol) based on hardware, with nanosecond-level synchronization accuracy |
| Wi-Fi | Supports both AP (Access Point) mode and Client (STA) mode |
| VLAN | Supports VLAN, including both Tagged and Untagged modes for VLAN ID assignment |
| Multi-link Management | Supports link detection, link backup, and flexible backup combinations of dual 5G, WAN, and Wi-Fi |
| Static Routing | Supports adding static routes |
| Dynamic Routing | Supports dynamic routing protocols OSPF and RIP |
| Policy Routing | Supports policy routing to enable traffic splitting |
| Wi-Fi (Optional) | |
| Protocol Standards | IEEE 802.11b/g/n/ac/ax (Optional) |
| Speed | IEEE 802.11ax(WiFi6), Up to 1774Mbps IEEE 802.11ac(WiFi5), Up to 866Mbps |
| Security Features | Open system, shared key, WPA/WPA2 authentication, WEP/TKIP/AES encryption |
| Working Modes | AP and Client (WiFi STA) |
| Firewall & Network Security | |
| Firewall | Full-state packet inspection (SPI), DoS attack prevention, multicast Ping packet filtering, port mapping, and IP-MAC binding |
| VPN | IPsec/OPENVPN/L2TP/PPTP/VXLAN/GRE/GRETAP |
| NAT | Supports DMZ and Port Forwarding |
| Address Filtering | Supports IP, domain name, and MAC filtering; Allows configuration of blacklists and whitelists |
| Applications | |
| DTU | Supports TCP, UDP, MQTT, HTTP, HJ212-2017, NTRIP, MODBUS TCP, MODBUS RTU, and MODBUS TCP-to-MODBUS RTU protocols |
| Data Acquisition | Southbound: Supports Modbus RTU/TCP and Siemens S7 protocols Northbound: Supports TCP, MQTT, HTTP, JSON, HJ212-2017; Supports up to 5 configurable servers with different protocols |
| Status Reporting & Retrieval | Supports querying and scheduled reporting of device status via TCP, MQTT, or HTTP, including dial-up status, operational status, and link usage |
| Traffic Statistics | Supports total device traffic and per-IP traffic statistics; Supports bandwidth control for excessive traffic |
| Scheduled Tasks | Supports scheduled reboot and customizable scheduled tasks |
| Cloud Device Management Platform | Supports remote configuration, remote upgrade, and remote monitoring |
| Location Services | Supports cell tower-based positioning; Optionally supports GPS/BeiDou; Can report either Base Station or GPS information |
| SNMP | Supports SNMP v1/v2/v3 |
| System Settings | |
| Logging Functionality | Supports local system log viewing, remote logging, and serial output logs; Supports log retention during power outage |
| Configuration Mode | Supports configuration via Web, Telnet, SSH, and Console; Supports configuration import and export |
| Upgrade Mode | Supports WEB upgrade and FOTA upgrade |
| System Time Settings | Built-in RTC clock; Supports NTP network time synchronization, manual time setting, and GPS time synchronization |
| Maintenance tools | Ping, Route tracing |
| Status Query | System status, modem status, network connection status, route status |
| Low Power Consumption Features | |
| Remote Wake-up | Supports entering or exiting low power mode via commands sent from a TCP server |
| Local Wake-up | Supports entering or exiting low power mode via commands sent from RS485 or CAN |
Device Power Consumption Table (Excluding V2X and Low Power Versions)
| Hardware Configuration | Status | Power Consumption (12V DC) |
| Dual 5G + WiFi6 | Standby | 650-680mA@12V DC |
| Working | 730-940mA@12V DC | |
| Dual 5G (without WiFi) | Standby | 470-510mA@12V DC |
| Working | 510-740mA@12V DC | |
| Single 5G + WiFi6 | Standby | 590-620mA@12V DC |
| Working | 630-770mA@12V DC | |
| Single 5G (without WiFi) | Standby | 420-450mA@12V DC |
| Working | 450-580mA@12V DC |
Product Selection Summary
| Model | PID | Version Description | |
| SV910 | SV910L | 00 | Supports 2*5G |
| 02 | Supports 1*5G+1*4G | ||
| 03 | Supports 1*4G | ||
| 04 | Supports 1*5G | ||
| 10 | Supports 2*5G+LP | ||
| 12 | Supports 1*5G+1*4G+LP | ||
| 13 | Supports 1*4G+LP | ||
| 14 | Supports 1*5G+LP | ||
| 30 | Supports 2*5G+LP+V2X | ||
| 32 | Supports 1*5G+1*4G+LP+V2X | ||
| 33 | Supports 1*4G+LP+V2X | ||
| 34 | Supports 1*5G+LP+V2X | ||
Note: The SV910L does not have a relay configuration, and the mains port has been reduced accordingly.
Product Topology
Product Interface
Frequently Asked Questions (FAQ)
What network configurations does the device support? +
The device supports dual-mode configurations, with options for dual 5G or a combination of 5G and 4G/Redcap modules. It covers comprehensive 5G, 4G, and 3G frequency bands globally.
What is the operating temperature range? +
The device is built for rugged environments, featuring an operating temperature range of -35℃ to +75℃ (-31℉ to +167℉) and a storage temperature range of -40℃ to +85℃.
Does it support Time-Sensitive Networking (TSN)? +
Yes, it supports TSN technology along with the IEEE 802.1AS (gPTP) protocol and hardware-based IEEE 1588v2 PTP, enabling nanosecond-level synchronization accuracy.
What are the power supply requirements? +
It operates using a wide power input of DC 9~48V and comes with an external power adapter (12V 2A). It also features reverse polarity, overvoltage, and overcurrent protection.
Is Wi-Fi supported on this device? +
Yes, Wi-Fi is available as an optional feature. It supports IEEE 802.11b/g/n/ac/ax standards, with Wi-Fi 6 capable of theoretical maximum speeds up to 1774Mbps.
How can the device be managed or configured? +
The device can be configured locally via Web, Telnet, SSH, and Console. It also supports remote configuration, upgrades (FOTA), and monitoring through a Cloud Device Management Platform.