Leave Your Message

China SR820 5G Connectivity Platform - Reliable CPE Router from Trusted Suppliers & Factory

,

Technical Specifications for SR820 Compact 5G CPE

,

The StarRouter 820 (SR820) series represents a cutting-edge solution for IoT wireless connectivity, seamlessly integrating 4G and 5G networks along with advanced Virtual Private Network (VPN) technologies. Manufactured in China, this device is designed by trusted suppliers, ensuring high-quality standards. The SR820 features dual-network backup with 4G/5G Wireless Wide-Area Network (WWAN) and Wi-Fi Wireless Local-Area Network (WLAN) capabilities, promoting uninterrupted access to multiple network connections. With robust security features and exceptional wireless service capabilities, this factory-made device delivers high-speed and stable data transmission for users in various industries.

,

    Product Features

    Supports 5G NR/RedCap networks
    Supports eSIM
    Supports WIFI6 (Optional)
    Supports GPS/BeiDou (Optional)
    Supports dual SIM cards with mutual backup functionality
    Supports Linux system for secondary development, with comprehensive development guidelines provided

    Topology Diagram

    Topology Diagram

    Technical Parameters

    Hardware Performance
    Memory 512MB
    FLASH 4GB EMMC
    WIFI Supports 2.4G/5.8G dual-band, theoretical maximum speed of 866.7Mbps. Optional WIFI 6, theoretical maximum speed of 1774Mbps
    Network support 5G: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N71/N75/N76/N77/N78/N79
    4G:
    FDD-LTE: B1/B3/B5/B7/B8/B20/B28/B32/B71
    TDD-LTE: B38/B40/B41/B42/B43/
    3G: WCDMA: B1/B2/B4/B5/B8
    Note: Frequency bands not listed can be supported by replacing the module
    System Time Time synchronization using NTP technology, with built-in RTC
    Interfaces
    Ethernet Interface 4 LAN Ports (1000/100 Mbps) – Any of the LAN ports can be configured to operate in WAN mode
    SIM Card Interface 2 slots (drawer-type card slot, supporting 1.8V/3V SIM/UIM cards)
    Reset 1 (Reset button)
    Antenna Interface 4 Ports 4G/5G antenna, impedance: 50 Ω, SMA female head interface
    2 Ports 2.4G/5.8G antenna, impedance: 50 Ω, SMA interface
    Power Interface 1 x 2-pin connector with 3.81mm pitch
    Serial Port 1 x RS232 / 1 x RS485, dual-row 3-pin terminal block with 3.5mm pitch
    Indicators 4 (1 PWR Light, 1 SYS Light, 1 WIFI Light, 1 NET Light)
    Power Characteristics
    Power External power adapter (12V 2A)
    Operating Voltage Wide power input DC 9~36V
    Standby Power Consumption 300~500mA@12V DC
    Operating Power Consumption 500~700mA@12V DC
    Operating Conditions
    Operating Temperature -35~+75℃ (-31~+167℉)
    Storage Temperature -40~+85℃ (-40~+185℉)
    Operating Humidity 5%~95% (non-condensing)
    Device Ventilation Natural heat dissipation, no noise
    Physical Characteristics
    Casing Material Metal housing
    Dimensions Length*Width*Height 135*98*55.5mm (excluding antenna and installation accessories)
    Installation Method Desktop placement, DIN rail installation, wall mounting
    Weight Net weight: 0.65KG (excluding antenna and installation accessories)
    Gross weight: 1.45KG (with accessories and packaging box)
    Device Safety and Reliability
    Security and Reliability Reverse polarity protection, overvoltage protection, overcurrent protection; Ethernet interface built-in 1.5KV electromagnetic isolation protection; RS232/RS485 interface built-in 15KV ESD protection; SIM/UIM card interface built-in 15KV ESD protection
    Protection Level IP30
    Certification Compliant with CCC, Rohs
    MTBF ≥100,000 hours
    Software Features
    Cellular Network Supports 5G or RedCap networks, with options to lock frequency bands and lock network modes
    5G LAN (optional) Supports 5G LAN
    Bridge Mode Supports bridge mode, allowing the IP address obtained from the cellular network dial-up connection to be directly assigned to the downstream device
    WAN Protocol Supports static IP, DHCP, PPPoE, PPP
    IP Applications Supports Ping, Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet
    WIFI Supports AP mode and STA (Client) mode
    VLAN Supports VLAN, including both Tagged and Untagged modes for VLAN ID assignment
    Multi-link Management Supports link detection and link backup, with optional flexible backup combinations of 5G, WAN, and Wi-Fi
    Static Routing Supports adding static routes
    Dynamic Routing Supports dynamic routing protocols OSPF and RIP
    Policy Routing Supports policy-based routing for traffic segmentation and load distribution
    Firewall & Network Security
    Firewall Full-state packet inspection (SPI), DoS attack prevention, multicast Ping packet filtering, port mapping, and IP-MAC binding
    VPN IPsec/OPENVPN/L2TP/PPTP/VXLAN/GRE/GRETAP
    NAT Supports DMZ and Port Forwarding
    Address Filtering Supports IP, domain name, and MAC filtering; Allows configuration of blacklists and whitelists
    Applications
    DTU Supports TCP, UDP, MQTT, HTTP, HJ212-2017, NTRIP, MODBUS TCP, MODBUS RTU, and MODBUS TCP-to-MODBUS RTU protocols
    Data Acquisition Southbound: Supports Modbus RTU/TCP and Siemens S7 protocols
    Northbound: Supports TCP, MQTT, HTTP, JSON, HJ212-2017; Supports up to 5 configurable servers with different protocols
    Status Reporting & Retrieval Supports querying and scheduled reporting of device status via TCP, MQTT, or HTTP, including dial-up status, operational status, and link usage
    Traffic Statistics Supports total device traffic and per-IP traffic statistics; Supports bandwidth control for excessive traffic
    Scheduled Tasks Supports scheduled reboot and customizable scheduled tasks
    Cloud Device Management Platform Supports remote configuration, remote upgrade, and remote monitoring
    Location Services Supports cell tower-based positioning; Optionally supports GPS/BeiDou; Can report either Base Station or GPS information
    SNMP Supports SNMP v1/v2/v3
    WLAN (Optional)
    Protocol Standard IEEE 802.11b/g/n/ac/ax (Optional)
    Rate IEEE 802.11ax (Wi-Fi 6) – Maximum speed: 1774 Mbps
    IEEE 802.11ac (Wi-Fi 5) – Maximum speed: 866 Mbps
    Security Features Open system, shared key, WPA/WPA2 authentication; WEP/TKIP/AES encryption
    Working Modes AP and Client (WiFi STA)
    System Settings
    Configuration Mode Supports Telnet, WEB, SSH, and Console configurations
    Upgrade Mode Supports WEB upgrade and FOTA upgrade
    Logging Functionality Supports local system logs, remote logs, and serial port output logs
    System Time Settings Built-in RTC clock; Supports NTP network time synchronization, manual time setting, and GPS time synchronization
    Maintenance tools Ping, Route tracing
    Status Query System status, modem status, network connection status, route status

    Product Interface

    Product Interfaces

    Product Dimensions

    Product Dimensions

    Frequently Asked Questions (FAQ)

    Does this router support 5G and Wi-Fi 6?
    Yes, the device supports 5G NR/RedCap networks and features optional Wi-Fi 6 (IEEE 802.11ax) with a theoretical maximum speed of up to 1774 Mbps.
    What is the operating temperature range for this device?
    The router is designed to operate in extreme environments, with an operating temperature range of -35~+75℃ (-31~+167℉).
    Does it support dual SIM cards?
    Yes, it features 2 SIM card slots supporting dual SIM cards with mutual backup functionality to ensure a stable and continuous network connection.
    What VPN protocols are supported for secure networking?
    The device ensures high network security by supporting a wide range of VPN protocols, including IPsec, OPENVPN, L2TP, PPTP, VXLAN, GRE, and GRETAP.
    How can the device be installed?
    It offers highly flexible installation methods, including desktop placement, DIN rail installation, and wall mounting to suit various industrial and commercial setups.
    Can this router be used for secondary development?
    Absolutely. It supports a Linux system specifically for secondary development, and comprehensive development guidelines are provided to assist developers.