5G Vehicle Gateway SV910 - Advanced Networking Platform from China Suppliers & Factory for Fleet and Transportation
Product Features
- Supports dual-mode configurations with optional dual 5G or 5G+4G/Redcap modules
- Supports 3×1000/100 BASE-T1, 3×100 BASE-T1, and 2×1000/100 BASE-TX ports
- Supports SIM/eSIM cards
- Supports two DO channels (relay outputs) and two DI channels (one dry-contact input and one wet-contact input)
- Supports input-voltage monitoring with reporting and alarm functions
- Supports low power mode, with remote and local wake-up (Optional)
- Supports V2X (Optional)
- Supports Time-Sensitive Networking (TSN) technology and IEEE 802.1AS (gPTP) protocol, with nanosecond-level synchronization accuracy
- Supports IEEE 1588v2 PTP (Precision Time Protocol) based on hardware, with nanosecond-level synchronization accuracy
Technical Parameters
| Hardware Performance | |
| CPU | Quad-core A55, up to 2 GHz clock speed |
| Memory | 2GB, expandable to 8GB |
| FLASH | EMMC 8GB, expandable to 64GB |
| WIFI (Optional) | Supports 2.4G/5.8G dual-band with a theoretical maximum speed of 866.7Mbps. Optional WIFI6 with a theoretical maximum speed of 1774Mbps |
| Network support |
5G: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N71/N75/N76/N77/N78/N79 4G: FDD-LTE: B1/B3/B5/B7/B8/B20/B28/B32/B71 | TDD-LTE: B38/B40/B41/B42/B43 3G: WCDMA: B1/B2/B4/B5/B8 Note: Frequency bands not listed can be supported by replacing the module |
| System Time | Time synchronization using NTP technology with built-in RTC |
| Interfaces | |
| Automotive Ethernet Interfaces | 3 × 1000/100 BASE-T1 and 3 × 100BASE-T1 |
| Standard Ethernet Interfaces | 2 × 1000/100 BASE-TX Ethernet interfaces with M12 aviation connectors |
| SIM Card Interface | 2 × nano-SIM slots |
| ESIM (Optional) | 2 × eSIM cards |
| Wi-Fi (Optional) | IEEE 802.11b/g/n/ac/ax IEEE 802.11ax(WiFi6), Up to 1774Mbps IEEE 802.11ac(WiFi5), Up to 866Mbps |
| GPS/ Beidou (Optional) | Supports GPS/Beidou |
| Antenna Interface | Two 4-in-1 mini FAKRA 5G/4G antenna ports, One 4-in-1 mini FAKRA Wi-Fi antenna port, One mini FAKRA V2X antenna port, One 4G antenna port. |
| Power Interface | 1 × 4-pin aviation connector, supporting dual redundant power inputs: DC 9–48 V |
| Serial Port | 1*RS232, 1*RS485 |
| CAN Interface | 2 × CAN interfaces, expandable to 3 × CAN interfaces |
| Relay | 2 × relay outputs, maximum input voltage: 30 VDC / 250 VAC, maximum current: 5 A |
| DI | 2 × opto-isolated DI channels (DI0 for dry contact testing, DI1 for wet contact testing) Logic 0: Wet contact 0–2 VDC or dry contact closed Logic 1: Wet contact 9–30 VDC or dry contact open |
| Indicators | 9 Indicators (1 PWR, 1 SYS, 1 WIFI, 1 NET, 3 signal strength, SIM1, SIM2) |
| Power Characteristics | |
| Power Supply | External power adapter (12V 2A) |
| Operating Voltage | Wide power input DC 9~48V |
| Operating Conditions | |
| Operating Temperature | -35~+75℃ (-31~+167℉) |
| Storage Temperature | -40~+85℃ (-40~+185℉) |
| Operating Humidity | 5%~95% (non-condensing) |
| Device Ventilation | Natural heat dissipation, no noise |
| Physical Characteristics | |
| Casing Material | Aluminum alloy housing |
| Dimensions | Length*width*height 233.8*142.7*58mm (excluding antenna and installation accessories) |
| Installation Method | Desktop placement |
| Weight | Net weight: 1.7KG (excluding antenna and installation accessories) |
| Device Safety and Reliability | |
| Hardware WatchDog | Built-in hardware watchdog with automatic device fault self-recovery |
| Safety and Reliability | Reverse polarity protection, overvoltage protection, overcurrent protection; Ethernet interface built-in 1.5KV electromagnetic isolation protection; RS232/RS485 interface built-in 15KV ESD protection; SIM/UIM card interface built-in 15KV ESD protection |
| Protection Level | IP40 |
| Certification | Complies with CCC, Rohs, CE |
| Networking Feature | |
| Cellular Network | Supports dual-module configuration, with options for dual 5G or 5G + 4G/RedCap modules. |
| 5G LAN (Optional) | Supports 5G LAN |
| Bridge Mode | Supports bridge mode, which can directly assign the IP from cellular network dial-up to the subordinate device |
| WAN Protocol | Supports Static IP, DHCP, PPPOE |
| IP Applications | Supports Ping, Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet |
| GPTP | Supports TSN (Time-Sensitive Networking) and the IEEE 802.1AS protocol, with nanosecond-level synchronization accuracy |
| PTP | Supports IEEE 1588v2 PTP (Precision Time Protocol) based on hardware, with nanosecond-level synchronization accuracy |
| Wi-Fi | Supports both AP (Access Point) mode and Client (STA) mode |
| VLAN | Supports VLAN, including both Tagged and Untagged modes for VLAN ID assignment |
| Multi-link Management | Supports link detection, link backup, and flexible backup combinations of dual 5G, WAN, and Wi-Fi |
| Static Routing | Supports adding static routes |
| Dynamic Routing | Supports dynamic routing protocols OSPF and RIP |
| Policy Routing | Supports policy routing to enable traffic splitting |
| Wi-Fi (Optional) | |
| Protocol Standards | IEEE 802.11b/g/n/ac/ax (Optional) |
| Speed | IEEE 802.11ax(WiFi6), Up to 1774Mbps IEEE 802.11ac(WiFi5), Up to 866Mbps |
| Security Features | Open system, shared key, WPA/WPA2 authentication, WEP/TKIP/AES encryption |
| Working Modes | AP and Client (WiFi STA) |
| Firewall & Network Security | |
| Firewall | Full-state packet inspection (SPI), DoS attack prevention, multicast Ping packet filtering, port mapping, and IP-MAC binding |
| VPN | IPsec/OPENVPN/L2TP/PPTP/VXLAN/GRE/GRETAP |
| NAT | Supports DMZ and Port Forwarding |
| Address Filtering | Supports IP, domain name, and MAC filtering; Allows configuration of blacklists and whitelists |
| Applications | |
| DTU | Supports TCP, UDP, MQTT, HTTP, HJ212-2017, NTRIP, MODBUS TCP, MODBUS RTU, and MODBUS TCP-to-MODBUS RTU protocols |
| Data Acquisition | Southbound: Supports Modbus RTU/TCP and Siemens S7 protocols Northbound: Supports TCP, MQTT, HTTP, JSON, HJ212-2017; Supports up to 5 configurable servers with different protocols |
| Status Reporting & Retrieval | Supports querying and scheduled reporting of device status via TCP, MQTT, or HTTP, including dial-up status, operational status, and link usage |
| Traffic Statistics | Supports total device traffic and per-IP traffic statistics; Supports bandwidth control for excessive traffic |
| Scheduled Tasks | Supports scheduled reboot and customizable scheduled tasks |
| Cloud Device Management Platform | Supports remote configuration, remote upgrade, and remote monitoring |
| Location Services | Supports cell tower-based positioning; Optionally supports GPS/BeiDou; Can report either Base Station or GPS information |
| SNMP | Supports SNMP v1/v2/v3 |
| System Settings | |
| Logging Functionality | Supports local system log viewing, remote logging, and serial output logs; Supports log retention during power outage |
| Configuration Mode | Supports configuration via Web, Telnet, SSH, and Console; Supports configuration import and export |
| Upgrade Mode | Supports WEB upgrade and FOTA upgrade |
| System Time Settings | Built-in RTC clock; Supports NTP network time synchronization, manual time setting, and GPS time synchronization |
| Maintenance tools | Ping, Route tracing |
| Status Query | System status, modem status, network connection status, route status |
| Low Power Consumption Features | |
| Remote Wake-up | Supports entering or exiting low power mode via commands sent from a TCP server |
| Local Wake-up | Supports entering or exiting low power mode via commands sent from RS485 or CAN |
Device Power Consumption (Excluding V2X and Low Power Versions)
| Hardware Configuration | Status | Power Consumption (12V DC) |
| Dual 5G + WiFi6 | Standby | 650-680mA@12V DC |
| Working | 730-940mA@12V DC | |
| Dual 5G (without WiFi) | Standby | 470-510mA@12V DC |
| Working | 510-740mA@12V DC | |
| Single 5G + WiFi6 | Standby | 590-620mA@12V DC |
| Working | 630-770mA@12V DC | |
| Single 5G (without WiFi) | Standby | 420-450mA@12V DC |
| Working | 450-580mA@12V DC |
Product Selection Summary
| Model | PID | Version Description | |
| SV910 | SV910L | 00 | Supports 2*5G |
| 02 | Supports 1*5G+1*4G | ||
| 03 | Supports 1*4G | ||
| 04 | Supports 1*5G | ||
| 10 | Supports 2*5G+LP | ||
| 12 | Supports 1*5G+1*4G+LP | ||
| 13 | Supports 1*4G+LP | ||
| 14 | Supports 1*5G+LP | ||
| 30 | Supports 2*5G+LP+V2X | ||
| 32 | Supports 1*5G+1*4G+LP+V2X | ||
| 33 | Supports 1*4G+LP+V2X | ||
| 34 | Supports 1*5G+LP+V2X | ||
Note: The SV910L does not have a relay configuration, and the mains port has been reduced accordingly.
Product Topology & Interface
Frequently Asked Questions
What network modes does the device support?
It supports dual-mode configurations with options for dual 5G or 5G+4G/Redcap modules to suit varied networking needs.
Can the device operate in extreme temperatures?
Yes, the device is designed to function reliably in harsh environments with an operating temperature range of -35~+75℃ (-31~+167℉).
Does the device support highly accurate time synchronization?
Yes, it supports Time-Sensitive Networking (TSN) and hardware-based IEEE 1588v2 PTP, both providing nanosecond-level synchronization accuracy.
How many Ethernet interfaces are available on the device?
The device is equipped with 3 × 1000/100 BASE-T1 interfaces, 3 × 100BASE-T1 interfaces, and 2 × 1000/100 BASE-TX standard Ethernet interfaces.
What options are available for waking up the device from low power mode?
The device supports both remote wake-up via commands sent from a TCP server, and local wake-up through RS485 or CAN commands.
Does the SV910L model include a relay configuration?
No, the SV910L model does not include a relay configuration, and its mains port has been adjusted accordingly.